Skip to main content

Freight Shipping from Oklahoma City to Dallas

248 miles5 hrs transitRates in 15 Minutes

Ship freight from Oklahoma City, OK to Dallas, TX with FMCSA-verified carriers. FTL from $533-$657, LTL from $336-$611. No hidden fees, no re-bills.

Distance

248 mi

Drive Time

5 hrs

FTL Budget Range

$533-$657

LTL Budget Range

$336-$611

Distance is road-adjusted straight-line mileage; drive time assumes 55 mph average including stops. Budget ranges apply a $2.15–$2.65 per-mile dry van band to that distance. These are planning figures, not quotes — live pricing depends on your commodity, equipment, timing and the market that week.

What actually drives the price on Oklahoma CityDallas

Mileage is the starting point, not the answer. Three things move a quote on this corridor more than distance does — what comes back the other way, what season you are shipping in, and what the route costs the driver to run.

Return freight — strong

Dallas ships out electronics (Texas Instruments), telecommunications equipment, consumer packaged goods — categories Oklahoma City takes in — so a truck running this lane has a realistic shot at a paying return load rather than deadheading. That usually shows up as a slightly better forward rate, because the carrier is not pricing an empty trip back into your quote.

Seasonal pressure

  • October-December. Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble.
  • March-October. Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze.

Cost of running it

Roughly $3–$5 in tolls one way, estimated from published commercial rates in OK, TX, plus about 1 fuel stop at a stop per 380 loaded miles. Exact routing and axle count will shift this.

Booking that saves money

Give more than 48 hours notice and avoid Friday-afternoon pickups. Those two habits save shippers more than negotiating does — a truck booked Tuesday for Thursday prices very differently from the same truck booked Friday morning for that afternoon.

Oklahoma City to Dallas Freight Corridor

Oklahoma City sits at the junction of three major interstates — I-35, I-40, and I-44 — creating a natural crossroads for north-south and east-west freight flows across the Southern Plains. Tinker Air Force Base is the city's largest employer and drives a significant volume of defense logistics. The metro's oil and gas sector, led by Devon Energy and Continental Resources, generates heavy oilfield equipment moves that keep flatbed carriers busy year-round.

Dallas is the economic engine of the DFW metroplex, housing more Fortune 500 corporate headquarters than any city except New York. Texas Instruments and the Telecom Corridor in Richardson generate a constant flow of high-value electronics freight, while the South Dallas warehouse district contains over 150 million square feet of distribution space. The city's central location means a truck leaving Dallas can reach 93% of the U.S. population within 48 hours.

The Oklahoma City-to-Dallas corridor spans 248 miles via I-35, I-40, I-35E, I-30. This lane connects oil & gas and aerospace & defense freight from the Oklahoma City market to technology and telecommunications demand in Dallas. Carriers running this route regularly maintain competitive rates through strong backhaul availability in both directions.

What Ships from Oklahoma City

Oklahoma City's economy is driven by oil & gas, aerospace & defense, agriculture, generating consistent outbound freight demand.

petroleum products

natural gas equipment

cattle & beef

wheat & grain

aerospace components

oilfield equipment

What Dallas Receives

Dallas's technology, telecommunications, financial services sectors drive strong inbound freight demand from markets like Oklahoma City.

consumer goods

raw materials

electronic components

building materials

imported merchandise

petroleum products

Recommended Equipment

Based on the commodities moving between Oklahoma City and Dallas, these equipment types best serve this corridor.

Dry Van (FTL)

Ideal for palletized consumer goods, electronics, packaged foods, and general merchandise. Enclosed protection from weather and theft.

$533-$657 estimated for this lane

Refrigerated (Reefer)

Required for temperature-sensitive freight including fresh produce, dairy, frozen foods, pharmaceuticals, and beverages. Maintains precise temperature control throughout transit.

$657-$831 estimated for this lane

Flatbed

Best for steel, lumber, machinery, building materials, and oversized loads that cannot be palletized or loaded through standard dock doors.

$707-$905 estimated for this lane

Tanker / Hazmat

Specialized equipment for liquid chemicals, petroleum products, and hazardous materials. Requires hazmat-endorsed drivers and placarding compliance.

$781-$1,054 estimated for this lane

Rate Estimates by Shipping Mode

Estimated rates for the Oklahoma City to Dallas lane (248 miles). Actual rates depend on commodity, weight, season, and equipment.

ModeRate EstimateTransit
FTL (Full Truckload)$533-$6575 hrs
LTL (Less Than Truckload)$336-$6117-9 days
Expedited / Hot Shot$806-$1,1163 hrs

Major Shippers on This Corridor

Key freight generators in both Oklahoma City and Dallas that drive volume on this lane.

Tinker Air Force Base

Continental Resources

Devon Energy

Texas Instruments (HQ)

AT&T (HQ)

Amazon DFW Fulfillment Network

Shipping Tips for Oklahoma City to Dallas

Oklahoma City Seasonal Advisory

Oilfield freight fluctuates with WTI crude prices — when prices climb above $70/bbl, drilling activity and equipment moves surge. Wheat harvest (June-July) drives seasonal grain hauling demand across western Oklahoma.

Dallas Seasonal Advisory

E-commerce fulfillment peaks massively during Q4 holidays. Construction freight is year-round due to DFW's unrelenting building boom. Texas Instruments production runs consistently but new product cycles create periodic shipping surges.

Same-Day Delivery Possible

At 248 miles, a single driver can complete this route within a standard driving window. Expedited same-day service is available for time-critical shipments at a premium.

Book Early for Best Rates

Spot market rates fluctuate daily. Booking 3-5 days in advance typically saves 10-15% compared to same-day or next-day freight requests. For recurring shipments, ask about contract rates.

Logistics Infrastructure

How freight actually flows in and out of Oklahoma City and Dallas — the warehouses, rail terminals, and highway spines that shape rates on this lane.

Origin

Oklahoma City, OK

Tier 2
Metro Population
1.4M metro
Avg Outbound Rate
$2.15-$2.50/mi
Key Highways
I-35, I-40, I-44
Rail / Intermodal
BNSF Oklahoma City Intermodal; Union Pacific Oklahoma City Yard
Warehouse Districts
Will Rogers World Airport/I-44 South, Midwest City/Tinker AFB Area, I-35/I-240 Junction

OKC's position as the midpoint of I-40 between the West Coast and Memphis makes it a critical relay and fuel stop for coast-to-coast carriers. Love's Travel Stops, headquartered here, operates the nation's largest truck stop network — and their own distribution freight out of OKC is a consistent load source.

Destination

Dallas, TX

Tier 1
Metro Population
7.6M metro (DFW)
Avg Outbound Rate
$2.00-$2.35/mi
Key Highways
I-35E, I-30, I-635 (LBJ)
Rail / Intermodal
BNSF Alliance Intermodal (Fort Worth); Union Pacific Mesquite Intermodal; BNSF Wilmer Intermodal
Warehouse Districts
South Dallas/I-20 Corridor, Mesquite/I-30 East, Garland/I-635 Northeast

Dallas's massive inbound-to-outbound imbalance — driven by the region's explosive population growth — means carriers delivering to DFW can almost always find loads out. The challenge is finding loads that pay well enough to justify the outbound leg, especially southbound to Houston where competition is fierce.

Return Loads from Dallas

Dallas ships out electronics (Texas Instruments), telecommunications equipment, consumer packaged goods — categories Oklahoma City takes in — so a truck running this lane has a realistic shot at a paying return load rather than deadheading. That usually shows up as a slightly better forward rate, because the carrier is not pricing an empty trip back into your quote.

Top Backhaul Commodities from Dallas

electronics (Texas Instruments)telecommunications equipmentconsumer packaged goodsprocessed foodsdefense systemse-commerce shipments

Seasonal Rate Patterns

  • October-December

    Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble.

  • March-October

    Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze.

Oklahoma City to Dallas Freight FAQs

How much does it cost to ship freight from Oklahoma City to Dallas?

As a planning figure, budget $533-$657 for a full truckload from Oklahoma City, OK to Dallas, TX. That is the 248-mile lane distance run against a $2.15-$2.65 per-mile dry van range, which is a broad industry band rather than a live quote for your freight. LTL lands roughly $336-$611 depending on freight class, weight and dimensions. Real pricing moves with fuel, season, equipment type and how much notice you give — a lane like this can quote well outside that band in a tight week. Send us the details and we will price it against what carriers are actually accepting right now.

How long does freight take from Oklahoma City to Dallas?

Standard FTL transit from Oklahoma City to Dallas is approximately 5 hrs by truck over 248 miles, with 1 typical fuel stop along the corridor. LTL shipments add 2-4 business days due to terminal transfers. Expedited service with team drivers can reduce FTL transit by up to 40%.

What equipment do I need for Oklahoma City to Dallas freight?

Equipment choice depends on your commodity. Oklahoma City commonly ships petroleum products, natural gas equipment, cattle & beef, which typically moves in standard dry van trailers. Dallas commonly receives consumer goods, raw materials, electronic components. Our team matches you with the right equipment type for your specific freight.

Is there good backhaul from Dallas to Oklahoma City?

Dallas ships out electronics (Texas Instruments), telecommunications equipment, consumer packaged goods — categories Oklahoma City takes in — so a truck running this lane has a realistic shot at a paying return load rather than deadheading. That usually shows up as a slightly better forward rate, because the carrier is not pricing an empty trip back into your quote. Why it matters to you as a shipper: backhaul is the single least visible input into your rate. Two lanes of identical mileage can quote hundreds of dollars apart purely because one has a return load waiting and the other does not.

What commodities move from Oklahoma City to Dallas?

Oklahoma City's top outbound commodities include petroleum products, natural gas equipment, cattle & beef, wheat & grain, aerospace components, oilfield equipment. Dallas's primary inbound freight includes consumer goods, raw materials, electronic components, building materials, imported merchandise, petroleum products. The industries driving the lane are oil & gas and aerospace & defense on the Oklahoma City end and technology and telecommunications in Dallas. That mix is what determines which trailer types run the corridor regularly — and a lane with steady demand for your equipment type is one where you will find a truck on short notice.

When are rates highest on the Oklahoma City to Dallas lane?

Rate pressure on this corridor follows the oil & gas and aerospace & defense calendar. October-December: Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble. March-October: Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze. Two habits that help regardless of season — book mid-week rather than Friday afternoon, and give more than 48 hours notice. Last-minute Friday pickups are where shippers overpay most consistently.

Can freight from Oklahoma City to Dallas be delivered same-day?

Yes. At 248 miles (5 hrs driving), a single driver can complete the Oklahoma City-to-Dallas lane in one shift. Same-day delivery requires booking before 9 AM local time at origin and confirming dock availability at destination. Expedited service runs 4 hours with priority handling.

Get Exact Rates for Oklahoma City to Dallas

Tell us what you are moving on the Oklahoma CityDallas corridor and we will source an FMCSA-verified carrier that fits the commodity, the timing and the budget. We check authority, insurance and safety record before a truck is ever assigned to your freight. Free quote, no obligation.

Mon-Fri 7AM-7PM CT | No obligation, no contracts

See Rates in 15 Min