Freight Shipping from Atlanta to Seattle
Ship freight from Atlanta, GA to Seattle, WA with FMCSA-verified carriers. FTL from $6,089-$7,505, LTL from $1,758-$2,807. No hidden fees, no re-bills.
Distance
2,832 mi
Drive Time
51 hrs
FTL Budget Range
$6,089-$7,505
LTL Budget Range
$1,758-$2,807
Distance is road-adjusted straight-line mileage; drive time assumes 55 mph average including stops. Budget ranges apply a $2.15–$2.65 per-mile dry van band to that distance. These are planning figures, not quotes — live pricing depends on your commodity, equipment, timing and the market that week.
What actually drives the price on Atlanta → Seattle
Mileage is the starting point, not the answer. Three things move a quote on this corridor more than distance does — what comes back the other way, what season you are shipping in, and what the route costs the driver to run.
Return freight — steady
Seattle's outbound mix (aircraft & aerospace parts, software/cloud hardware, seafood (Alaska processing)) partially matches what moves back toward Atlanta. Return loads exist but are not guaranteed, so carriers price this lane with some repositioning risk built in.
Seasonal pressure
- October-December. Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble.
- July. Most auto plants take summer shutdown, so parts freight on this corridor drops off predictably for a few weeks and capacity loosens with it.
- March-October. Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze.
Cost of running it
Roughly $45–$75 in tolls one way, estimated from published commercial rates in GA, WA, TN, KY, OH, IN, IL, MO, AR, OK, NM, plus about 7 fuel stops at a stop per 380 loaded miles. Exact routing and axle count will shift this.
Booking that saves money
Give more than 48 hours notice and avoid Friday-afternoon pickups. Those two habits save shippers more than negotiating does — a truck booked Tuesday for Thursday prices very differently from the same truck booked Friday morning for that afternoon.
Atlanta to Seattle Freight Corridor
Atlanta is the freight crossroads of the Southeast and arguably the most balanced truck market in the country. The convergence of I-75, I-85, and I-20 creates a natural hub where carriers can find loads heading in virtually any direction within hours. UPS and The Home Depot both headquarter their logistics operations here, contributing to a freight ecosystem so dense that the metro has more warehouse space than most states. Norfolk Southern and CSX both maintain major intermodal operations, making Atlanta the rail freight capital of the Southeast.
Seattle is the Pacific Northwest's freight powerhouse, combining one of the nation's largest container ports with the headquarters of Amazon, Boeing, Microsoft, and Costco. The Northwest Seaport Alliance (Seattle + Tacoma) is the fourth-largest container gateway in North America, funneling Asian imports into the U.S. interior via BNSF and Union Pacific rail. Amazon's explosive last-mile network has transformed the region's freight landscape, with dozens of delivery stations and fulfillment centers scattered across the Puget Sound.
The Atlanta-to-Seattle corridor spans 2,832 miles via I-75, I-85, I-5, I-90. This lane connects logistics & distribution and film & entertainment freight from the Atlanta market to technology and aerospace (boeing) demand in Seattle. Carriers running this route regularly maintain competitive rates through strong backhaul availability in both directions.
What Ships from Atlanta
Atlanta's economy is driven by logistics & distribution, film & entertainment, financial technology, generating consistent outbound freight demand.
automobiles (Kia)
poultry products
soft drinks & beverages
carpet & flooring
film equipment
packaged foods
What Seattle Receives
Seattle's technology, aerospace (boeing), e-commerce (amazon) sectors drive strong inbound freight demand from markets like Atlanta.
containerized imports (Asia)
consumer electronics
automotive vehicles
construction materials
industrial machinery
food & beverage
Recommended Equipment
Based on the commodities moving between Atlanta and Seattle, these equipment types best serve this corridor.
Dry Van (FTL)
Ideal for palletized consumer goods, electronics, packaged foods, and general merchandise. Enclosed protection from weather and theft.
$6,089-$7,505 estimated for this lane
Refrigerated (Reefer)
Required for temperature-sensitive freight including fresh produce, dairy, frozen foods, pharmaceuticals, and beverages. Maintains precise temperature control throughout transit.
$7,505-$9,487 estimated for this lane
Flatbed
Best for steel, lumber, machinery, building materials, and oversized loads that cannot be palletized or loaded through standard dock doors.
$8,071-$10,337 estimated for this lane
LTL (Less Than Truckload)
Cost-effective for shipments under 10,000 lbs or fewer than 10 pallets. Shared trailer space with other shippers reduces cost for smaller loads.
$1,758-$2,807 estimated for this lane
Rate Estimates by Shipping Mode
Estimated rates for the Atlanta to Seattle lane (2,832 miles). Actual rates depend on commodity, weight, season, and equipment.
| Mode | Rate Estimate | Transit |
|---|---|---|
| FTL (Full Truckload) | $6,089-$7,505 | 51 hrs |
| LTL (Less Than Truckload) | $1,758-$2,807 | 53-55 days |
| Expedited / Hot Shot | $9,204-$12,744 | 34 hrs |
| Intermodal (Rail + Truck) | $3,823-$5,239 | 54-56 days |
Major Shippers on This Corridor
Key freight generators in both Atlanta and Seattle that drive volume on this lane.
The Home Depot (HQ)
UPS (HQ)
Coca-Cola (HQ)
Amazon (HQ)
Boeing Everett/Renton
Microsoft (Redmond)
Shipping Tips for Atlanta to Seattle
Atlanta Seasonal Advisory
Home improvement freight (Home Depot's supply chain) peaks March through June. Carpet shipments from the Dalton mills 90 miles north run heaviest in spring and fall. Coca-Cola distribution spikes ahead of summer and holiday seasons.
Seattle Seasonal Advisory
Port volumes peak July-October as retailers stock for holidays. Apple and cherry harvest (July-September) from eastern Washington creates heavy reefer demand. Boeing production schedules drive oversized and flatbed freight year-round. Amazon Q4 surge (October-December) is the single largest seasonal freight event in the region.
Consider Team Drivers
At 2,832 miles, this route exceeds single-driver HOS limits. Team drivers can deliver in 51 hours without mandatory 10-hour rest breaks, cutting transit time nearly in half compared to a solo driver.
Book Early for Best Rates
Spot market rates fluctuate daily. Booking 3-5 days in advance typically saves 10-15% compared to same-day or next-day freight requests. For recurring shipments, ask about contract rates.
Logistics Infrastructure
How freight actually flows in and out of Atlanta and Seattle — the warehouses, rail terminals, and highway spines that shape rates on this lane.
Origin
Atlanta, GA
- Metro Population
- 6.1M metro
- Avg Outbound Rate
- $2.20-$2.55/mi
- Key Highways
- I-75, I-85, I-20
- Rail / Intermodal
- NS Inman Yard; CSX Fairburn Intermodal; NS Austell Intermodal
- Warehouse Districts
- South Atlanta/I-75 (McDonough/Locust Grove), West Atlanta/I-20 (Douglasville/Lithia Springs), Northeast/I-85 (Braselton/Jefferson)
“Atlanta's I-285 perimeter loop is the single most important freight route in the Southeast. Carriers who understand the clockwise vs. counterclockwise traffic patterns and time their crosstown runs to avoid the I-285/I-85 Spaghetti Junction can save 45-90 minutes per delivery.”
Destination
Seattle, WA
- Metro Population
- 4.0M metro
- Avg Outbound Rate
- $2.15-$2.55/mi
- Key Highways
- I-5, I-90, I-405
- Rail / Intermodal
- BNSF Seattle International Gateway; Union Pacific Argo Yard; Port of Seattle Terminal 18
- Port Access
- Port of Seattle / Northwest Seaport Alliance (0 mi)
- Warehouse Districts
- Kent Valley/I-5 South, SoDo/Harbor Island, Sumner/I-167
“Seattle's chronic truck driver shortage — driven by sky-high cost of living — means carriers willing to base here command premium rates. The I-5 corridor between Seattle and Portland is one of the most consistently high-paying lanes on the West Coast, especially for reefer loads of Pacific Northwest produce.”
Return Loads from Seattle
Seattle's outbound mix (aircraft & aerospace parts, software/cloud hardware, seafood (Alaska processing)) partially matches what moves back toward Atlanta. Return loads exist but are not guaranteed, so carriers price this lane with some repositioning risk built in.
Top Backhaul Commodities from Seattle
Seasonal Rate Patterns
October-December
Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble.
July
Most auto plants take summer shutdown, so parts freight on this corridor drops off predictably for a few weeks and capacity loosens with it.
March-October
Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze.
Atlanta to Seattle Freight FAQs
How much does it cost to ship freight from Atlanta to Seattle?
As a planning figure, budget $6,089-$7,505 for a full truckload from Atlanta, GA to Seattle, WA. That is the 2,832-mile lane distance run against a $2.15-$2.65 per-mile dry van range, which is a broad industry band rather than a live quote for your freight. LTL lands roughly $1,758-$2,807 depending on freight class, weight and dimensions. Real pricing moves with fuel, season, equipment type and how much notice you give — a lane like this can quote well outside that band in a tight week. Send us the details and we will price it against what carriers are actually accepting right now.
How long does freight take from Atlanta to Seattle?
Standard FTL transit from Atlanta to Seattle is approximately 51 hrs by truck over 2,832 miles, with 7 typical fuel stops along the corridor. LTL shipments add 2-4 business days due to terminal transfers. Expedited service with team drivers can reduce FTL transit by up to 40%. Intermodal rail-truck service via NS Inman Yard to BNSF Seattle International Gateway takes 5-7 days but offers significant cost savings.
What equipment do I need for Atlanta to Seattle freight?
Equipment choice depends on your commodity. Atlanta commonly ships automobiles (Kia), poultry products, soft drinks & beverages, which typically moves in standard dry van trailers. Seattle commonly receives containerized imports (Asia), consumer electronics, automotive vehicles. Our team matches you with the right equipment type for your specific freight.
Is there good backhaul from Seattle to Atlanta?
Seattle's outbound mix (aircraft & aerospace parts, software/cloud hardware, seafood (Alaska processing)) partially matches what moves back toward Atlanta. Return loads exist but are not guaranteed, so carriers price this lane with some repositioning risk built in. Why it matters to you as a shipper: backhaul is the single least visible input into your rate. Two lanes of identical mileage can quote hundreds of dollars apart purely because one has a return load waiting and the other does not.
What commodities move from Atlanta to Seattle?
Atlanta's top outbound commodities include automobiles (Kia), poultry products, soft drinks & beverages, carpet & flooring, film equipment, packaged foods. Seattle's primary inbound freight includes containerized imports (Asia), consumer electronics, automotive vehicles, construction materials, industrial machinery, food & beverage. The industries driving the lane are logistics & distribution and film & entertainment on the Atlanta end and technology and aerospace (Boeing) in Seattle. That mix is what determines which trailer types run the corridor regularly — and a lane with steady demand for your equipment type is one where you will find a truck on short notice.
What tolls should I expect on the Atlanta to Seattle route?
Budget roughly $45-$75 one way. That is an estimate built from published commercial toll rates in the states this corridor is likely to cross (GA, WA, TN, KY, OH, IN, IL, MO, AR, OK, NM) — actual tolls depend on the exact routing, axle count and whether the carrier runs a transponder. The part worth asking about: most quotes either fold tolls into the line-haul or bill them separately as a pass-through. Confirm which model you are being quoted before you compare two carriers on price.
When are rates highest on the Atlanta to Seattle lane?
Rate pressure on this corridor follows the logistics & distribution and film & entertainment calendar. October-December: Retail peak. Dry van capacity tightens nationally ahead of the holidays — booking two or more weeks out is the difference between a normal rate and a scramble. July: Most auto plants take summer shutdown, so parts freight on this corridor drops off predictably for a few weeks and capacity loosens with it. March-October: Construction season. Flatbed and step-deck demand climbs with the building calendar and stays elevated until the first hard freeze. Two habits that help regardless of season — book mid-week rather than Friday afternoon, and give more than 48 hours notice. Last-minute Friday pickups are where shippers overpay most consistently.
Should I use team drivers for the Atlanta to Seattle lane?
At 2,832 miles, this route exceeds a solo driver's hours-of-service limits and requires at least one 10-hour break, adding roughly 14-18 hours to transit. Team drivers typically deliver in 30-37 hours — nearly half the solo transit — at a 20-35% rate premium. For time-critical freight over 1,200 miles, teams generally pay for themselves.
Get Exact Rates for Atlanta to Seattle
Tell us what you are moving on the Atlanta–Seattle corridor and we will source an FMCSA-verified carrier that fits the commodity, the timing and the budget. We check authority, insurance and safety record before a truck is ever assigned to your freight. Free quote, no obligation.
Mon-Fri 7AM-7PM CT | No obligation, no contracts